Supplies ~
I bought two of these panels from Marcy Tilton's booth at Sew Expo in March 2016. I'm finally using this collection fabric - you know my new fabric usage designations.
As an aside, I bought a lot of fabric that trip and this is the fifth piece I've used of the dozen pieces I purchased. Slowly but surely working through that fabric...*LOL*
7 - 1" yellow buttons from Pacific Trimmings
Black 'n White piping from the trim stash
Floral bias binding made from a quilting cotton purchased from Zooks, Lancaster, PA
Interfacing from Steinlauf & Stoeller
Pattern Alterations ~
Since I'm making View C, I started with a size 28 because I wanted an unfitted topper that a turtleneck or sweater could go under easily. Even starting with a 28, I needed to add ease to the hip area. I added an inch to each side seam from the bust area down starting with a quarter inch to a full inch at the hemline.
Sleeves ~
o The sleeves were already oversized so I didn't need to make an alteration to the body of them.
o Although I did make a shoulder alteration to make the sleeves more set in than the slightly dropped shoulder the pattern suggests.
o I did a slash and overlap of 7/8" at the shoulder on the front and back pieces to remove the excess.
o I should have removed some of the excess from the sleeve cap but didn't realize this until I started to construct the topper. Will remove it for the next version.
Finally, I did shorten it from dress length to tunic length by removing 10" from the hemline. Here is the first fitting done at the sew-in.
Construction ~
The cutting was creative on this one. I really wanted to have the sunflowers run down the fronts of the topper. Once I got the front and back cut out, I then cut the sleeves. However, before I cut them out, I did a sketch in my Cashmerette Sketchbook to see if I'd like the way the stripes worked.
All of the other pieces were cut out of the remaining fabric remnants, however, there wasn't enough for the side seam pockets. I honestly didn't care about including them. I can always put pockets in the next version. That was the only thing I omitted.
As I mentioned above, since I neglected to alter the sleeve pattern there was way more gathering than I would have liked in the sleeve cap. I made it work. It's not perfect but it's wearable.
The last construction challenge was the buttons. I found some buttons at Pacific Trimmings that I thought would be perfect for the topper ~ right color, right size but I was wrong. When I laid them on the topper even using all 10 of them, they were just too small. So back to Pacific Trimmings where I purchased three different larger sized yellow buttons, finally settling on these. They're lighter in hue but coordinate nicely with the sunflowers.
One more thing ~
I left my back facing piece at home. Left it on the ironing board and I just didn't want to wait until the next day to work on the topper. So I bought some black quilting cotton from the Urban Sewciety's store and used that instead. If I was going to wash the topper I would be concerned but since I will probably have to dry clean it, I will wait to see how that decision turns out.
A Few Pictures ~
When I took these pictures it was a warm Sunday in February. In the Northeast this has been a pretty mild winter. No heavy snows, no days of chilly/freezing temps and bitterly cold winds so I am seriously starting to think about spring. So I styled this topper how I would wear it now and how I will wear it in a few months...
Winterized...
For Spring...
Conclusion ~
I will make this again both as a topper and a longer blouse/tunic. In this version the sleeves turned out to be 3/4 length due to my alterations, so I will need to fix my pattern for future makes. I also had a few ideas of alternative hem closures. Maybe a buckle, large snap or button instead of the ties to give the sleeve hem a cleaner finish. I'm already working on my next version so it should show up sooner or later.
...as always more later!
