If Fuzzy Wuzzy was a Bear

I saw this fabric on StyleMaker's site and all I could think was what a fun and cozy vest this would be over a turtleneck.

Cozy Checkered Teddy Sherpa

Supplies ~

OOP pattern McCalls 7481 - I've used this pattern several times over the years with each make being very different from the others.

1.5 yards of Checkered Cozy Teddy Sherpa Fleece (also in another color)

2 yards of polyester printed lining from Fabric Mart (deep stash)

Snaps purchased from SIL Threads (yet to be sewn on the vest)

I named this the Fuzzy Wuzzy Bear Vest because I knew it would not be a slim look on me. But I wasn't going for slim. I was going for warm and comfortable and this vest fits the bill.

A couple of things:

As expected this was a "bear" to cut out.  I had to make sure that all the pattern pieces were laying in the same direction.  I didn't want the checkers to have a variation of color in different sections of the vest.

Then there were all of the fleece cuttings flying around as I cut the pieces out. I ended up serging the edges of the pieces, even though I lined the vest, to prevent the cuttings from being everywhere.  I also had to clean my serger as I serged each piece because the cuttings were everyplace.  It was a flurry of blue sherpa fleece in every crevice.

I chose a pattern that had some interest to it but not a lot of pieces.  I'd altered this pattern back in February 2019 to include in-seam pockets in a vest. That vest inspired this one...and that's where this project went left!

There were no instructions for this vest so I went with what I remembered.  Constructing the shell wasn't a project.  I made the lining from the pattern pieces without the pockets.  Then I sewed the lining to the vest. I clipped the curves and the armholes. Went to turn the vest and it wouldn't turn. Y'all I thought I would lose my mind because no matter what I did, it wouldn't turn.  

Lining sewn to the vest

Inside shell of the vest

I had to unpick the hem and the armholes sleeves to flip the lining in.  Then because I couldn't figure out how to machine sew it together (even after consulting my internet friend, Google) I ended up handstitching the lining in.  Yes, I handstitched the hemline, and each armhole.  Luckily the furry sherpa hid my hand stitching. Then since I didn't edge stitch the lining to the sherpa fabric, I use long stitches to tuck the lining into the vest. That took 4.5 hours of watching Bridgerton Season 3, to rip and then hand stitch the vest back together.  BUT, it worked!

...and that's why the snaps purchased for the vest weren't sewn on the vest before I wore it out in public...because traumatized from all that handstitching! 😉

So here is the vest in all it's glory...

Vest worn with vintage Sarah Coventry broach

My friend makes me laugh every time she takes pics

The inside of the vest

The finished vest looks just how I imagined it would when I saw the fabric on StyleMaker's website. It's been really cold here lately, like colder than Alaska cold, so this was perfect the day I wore it to work since it was 22 degrees outside!  

This isn't the only garment I made during my holiday break, there's more coming!  Honestly it's been so dayum cold and windy, acting like we live in Antarctica, that I haven't been pressed about pictures.  Also, after these garments, I stopped sewing for a minute. I was living in cashmere sweaters and sweatshirt layers...not much me made to keep me warm against the artic temps.

So, I still have more share.  We did take more photos on another day of another pair of pants I made.  Will share that soon.  The temperatures have finally normalized and I have a few days off so maybe I will get some more sewing in.

...as always more later!

*I know Blogger has made it more challenging to sign in but would you kindly sign your name if you use anonymous.  It makes it easier to talk back to you.  Thanks so much!

Border Print TNT Shirt

I only own one me-made white shirt. It works for everything so there's no problem with it.  But I started to dream of white shirts that had some kind of design or print on them.  Over last year's Thanksgiving break, I pulled three fabrics from the collection to make this work.

The first one I worked on was inspired by a Coldwater Creek shirt. 

I had five yards of a double border print purchased from Fabric Mart in 2022. 

I started with the TNT version of my shirt pattern used to created my Mood Border print Shirt.  This fabric didn't need as elaborate a cut out but I didn't want a seamline on my front piece. The continuity of the print was important to me.  

I've made about 40 shirts during the last decade. I have plans to make many more.  Shirts work for my lifestyle and I can use the most amazing prints/panels/designs to create unique garments.  Since I have a TNT pattern with many different moving pieces, I can pretty much achieve any look I want.  However, that doesn't mean that I don't have at least a dozen other shirt patterns in my pattern stash.

So some photos from the cutting out process...

Here is the pleating process used on the shirt back.

I started with 1" pleats.  But using 1" pleats didn't take up enough fabric to meet the back yoke.  

Next I moved to 1.5" pleats.  Again, no go. So, I moved to 2" pleats and wallah that worked.

To secure the pleats, I basted across the top of the shirt back.  Then pressed the pleats flat.  Finally I pressed with spray starch to insure the pleats will hold. I also added a line of stitching at the edge of every pleat to help it hold it's shape.

That was the most complicated part of the shirt and took several days to complete because the frustration was real!

The rest of the construction was my normal process. Now with the weight loss it's an oversized shirt. Also, I promise to stop talking about my weight loss but right now it's like a living breathing thing that affects everything daily.

Here are a few photos of the finished garment...

(and yes this is a hair piece added to my ponytail)

Conclusion ~ 

I should have used the pattern that I based this shirt upon.  Not everything has to be remade by me! Sometimes I should stick with the experts.*LOL* Especially since I rifled through my pattern collection to donate some patterns at the Black Sewing Network Event and found the original! 

Les Lubies DeCadia Saxa Shirt

Wearability Report:

After my daughter took photos of this shirt, I wore it to work the next day. A few things, it didn't take long for the pleats to be come looser, wrinkled and lose their crispness with the wearing. It made a loose wearing shirt, even looser. To wear this shirt again, it will need some serious pressing to bring back the original crispness of the shirt.

Also I received several compliments regarding the shirt from women passing me on the street and when I went to Macy's to pick up a few things.

I won't be making this shirt again without using the pattern.  It's a one and done!

*I know Blogger has made it more challenging to sign in but would you kindly sign your name if you use anonymous.  It makes it easier to talk back to you.  Thanks so much!

...as always more later!

Rewind it Back - New Look 6340

I've seriously been walking down memory lane of my previous makes.  Part of it is because I don't wanna fit a new pattern.  Part of it is because these garments worked for me and I need that in this updated body. So, today I'm revisiting New Look 6340 which is still in Simplicity's catalog. This is my newest version.

Between 2017 and 2020 - I made seven garments from this pattern - 2 sleeveless maxi dresses, 1 tunic, and 4 different dress versions.  My favorite was this denim version:

I wore this one and the linen versions the most.  And only one still lives in my closet - this maxi version.

Supplies ~

3 yards of a midweight linen print from Mood Fabrics online purchased several years ago

22" light blue zipper from the zipper stash

2 7/8" black buttons from deep in the button stash

2 yards of black piping from Daytona Trimming via the trim stash

Construction ~

Thankfully, when I pulled the pattern out of the folder, all of the alterations had been done to the main pattern pieces. There was even the maxi version in pattern form.  So, happy about old me now.

The only change I made was to add a 1/2" to each sleeve side seam. I remember these sleeves as snug fitting and wanted to make sure that they didn't look tight on my even more bodacious biceps.

I added piping to the neckline, sleeve hems and pockets.

The pockets were getting lost in the busy print.  So added piping along with 

the black buttons to make the pockets stand out.

Added a facing to the sleeve hems to encase the piping.

Otherwise, it was a simple sew.

Wearability ~

I wore this dress to work this week and took pictures in my office.  This dress was comfortable to wear, however, because of the fabric's weight, it's not as drapey as I would like.  The thing that bothered me was that it tended to bunch at my knees when the wind was blowing. Otherwise, it was a good wear.

A few more photos ~

I'm glad I reused this pattern.  Since I own loads of linen for future makes, I will definitely sew this again next spring/summer.

*I know Blogger has made it more challenging to sign in but would you kindly sign your name if you use anonymous.  It makes it easier to talk back to you.  Thanks so much!*

...as always more later!

Water Lilies Myosotis - UPDATED!

I've thought about why I return to this dress pattern over and over again. Like why don't I use another pattern? Honestly it's because this pattern checks all of my boxes. It's comfortable to wear. It works in a variety of fabrics, patterns and colors. Mostly I feel pretty in it.  Let's not forget that!

At the end of May 2023, I spent my birthday with my bestie in Lancaster, PA.  The home of cheap sewing supplies and a short ride to Fabric Mart.  The true Disney World of my life! We visited a few quilting stores and shocked several employees with me stating that I wanted to use some of the quilting cottons for clothing.

At one quilt store (Burkholders), I purchased the Water Lilies border print by Michael Design Works and the coordinating striped water lilies & print pattern because as I held the fabrics in my hand, I could see another Myosotis.  So why would I deny this fabric what it wanted to become!

One thing though, this is a complicated sew. Therefore, there are a lot of progress photos making this a very long post.  Right here I'd like to thank my pass self for being diligent in taking them because when I finally finished this a year later I would NEVER have remembered these details without them.

Supplies ~

5 yards of 100% quilting cotton Water Lilies

2 yards of 100% quilting cotton coordinating Water Lilies print

9 - 5/8" green sheer and patterned buttons (purchased from the Quilt Store) Normally I use 12 buttons but they only had 9 so I made due.

Construction ~

Working with a border print is always a challenge. It makes me think outside the box to make the fabric sing yet end up with a wearable yet amazing garment. This was a complicated sew because I was basically remaking the pattern pieces to fit the vision in my head.  There was some pattern work done to accommodate the fabric.  

Bodice:

The bodice piece was enlarged and then the button front piece was removed.  I made a separate piece for the button front. 

I knew I wanted the bodice to be from the lighter part of the fabric. So I needed to sit on it a minute to figure out how to make the fabric work for me. I ended up cutting it on the crosswise grain to make the most of the lighter fabric.

After the bodice piece was cut out, I did a trial of how the fabric from the other pieces of fabric would work with the bodice.

I also did a test with the buttons I choose to see how they would work once the bodice was completed.

Skirt:

The skirt is cut on the crosswise to use all of the border print in the design. 

I removed the original border and added the border from the coordinating piece of fabric after adding the button band to the front.

Sleeve:

Was cut from the main border piece so it coordinated with the dress' skirt. I added elastic to the sleeve to make them short and puffy.  I like this style because it adds some grown up whimsy to the dress and it covers my bodacious arms.

Collar/Front Band:

This was made entirely from the border piece of the coordinating piece. It's the ultimate border/stripe to the entire piece. And the reason it took so long to finish the dress.  Fussy cutting that border held me up for WEEKS! 

Then I had to recut the collar and collar band because of the way I added the border to the front of the dress.  I was hoping that I had enough of the border print left to just cut larger pieces. Ummm no.  The collar had to be pieced to get the length I desired.

I will admit that this went through a few iterations before I settled on this one. But this one highlights the water lilies but yet brings the drama a good border print garment should.

It took me over two months from the time I started this to finish it.  When I say my sewjo had been vacationing, I wasn't kidding.  However, I had a few days off at the end of July/beginning of August 2023, so I finished this up.  When I say this was an involved sew, please believe me that it was.  I had to rethink everything to make the border print work the way I saw it.  All of this took time and since my sewjo was weak, those things took longer than normal.

Then it sat while I waited to get the urge to sew the buttons and buttonholes on the dress.  It sat almost a year before I decided I needed to wear it to church one really hot July Sunday. Then and only then was I motivated to do the last 2 steps!

Tie Band:

As you know, I've lost quite a bit of weight, and I didn't want this dress to sit in the closet or get packed away. I decided to add a ribbon tie to the bodice side seams to remove some of the fullness of the top. 

• I thought I had a solid green wider ribbon in my trims stash.
• However, the green I had was a 1/2" wide and would get lost on the dress. 
• There was a 2" pink ribbon on hand. 
• I cut a 15" length of both ribbons.
• Then I laid the green ribbon on top of the pink ribbon and used 1/2" steam-a-seam 2 to iron the two pieces together.
• I didn't want to stitch the two ribbons together because they both have a distinctive stitch on their edges. 

A few pictures of the dress in 2025. I wore it to work the other day and my co-worker graciously took the photos below:

I'm calling the sewing I'm doing now, "Art Teacher Chic" cause I'm all about the fabric.  How can I manipulate it.  How I can make something unusual and different. I know I will make another Myosotis because it's my go to pattern.  

I know it's a lot of photos but we took them near my job at Broadway & 39th Street at the Art Installment, I'm calling the bones. I only wore this beauty only once last summer and I received so many compliments. I'm glad I finally got to wear it to work this summer and document that fact.  This was such a complicated sew, I'm glad I posted it in case I want to refer to it in the future.

...as always more later!